Westinghouse PXR698 Oven User Manual

The Westinghouse PXR698 is a premium built-in electric oven featuring convection cooking, pyrolytic self-cleaning, multiple cooking functions, digital controls with touch interface, child safety lock, programmable timer, and energy-efficient operation. Designed for 240V AC power supply. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Cooking Functions 7. Pyrolytic Self-Cleaning 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital touch control panel, convection fan, heating elements (top, bottom, rear), oven light, door with triple-glazed glass, telescopic racks, pyrolytic cleaning system.

FeatureDescription
Convection CookingFan-assisted for even heat distribution and faster cooking
Pyrolytic Self-CleanHigh-temperature cleaning cycle that reduces grease to ash
Digital Touch ControlsIntuitive interface with programmable settings
Multiple Cooking FunctionsBake, grill, fan bake, fan grill, defrost, pizza mode
Child Safety LockPrevents accidental activation of controls
Programmable TimerUp to 24-hour timer with automatic shut-off
Energy Efficiency ClassA-rated for reduced power consumption
Interior LightLED illumination for monitoring cooking progress
Telescopic RacksFull extension slide-out racks for easy access
Door Cooling SystemKeeps exterior cool during operation

Installation

Unpack and inspect contents. Ensure proper electrical connection and cabinet cutout dimensions.

  1. Electrical Connection: Must be installed by qualified electrician. Connect to 240V AC, 50Hz supply with appropriate circuit breaker.
  2. Cabinet Preparation: Cutout dimensions: 595mm (W) x 595mm (H) x 550mm (D). Ensure adequate ventilation space around oven.
  3. Mounting: Secure oven into cabinet using provided brackets. Ensure oven is level.
  4. Final Check: Verify door opens smoothly and all controls are accessible.

WARNING! Installation must be performed by qualified personnel. Disconnect power before installation.

First-Time Setup

After installation, perform initial setup before first use.

  1. Remove protective films: Peel off all plastic films from interior and exterior surfaces.
  2. Initial heating: Run oven empty at 200°C for 60 minutes to burn off manufacturing residues.
  3. Set clock: Press CLOCK button and set current time using +/- buttons.
  4. Test functions: Verify all cooking modes and temperature settings work correctly.
  5. Child lock: Enable safety lock if required via CONTROL LOCK button.

CAUTION! Ensure proper ventilation during initial heating. Keep area clear of flammable materials.

Specifications

Controls and Settings

Control Panel: Touch buttons with rotary selector and digital display.

Main Controls: POWER ON/OFF, FUNCTION SELECTOR, TEMPERATURE SETTING, TIMER, CLOCK, CHILD LOCK, LIGHT, SELF-CLEAN START.

Cooking Functions: Select via FUNCTION button - Conventional Bake, Fan Bake, Fan Grill, Grill, Defrost, Pizza, Bottom Heat, Top & Bottom Heat. Temperature Setting: Use +/- buttons or rotary selector (50-250°C). Timer: Program cooking duration (up to 24 hours). Child Lock: Press and hold CONTROL LOCK for 3 seconds. Display: Shows temperature, time, function, and timer status.

Cooking Functions

Select appropriate function for cooking needs.

  1. Conventional Bake: Top and bottom heating elements for traditional baking.
  2. Fan Bake: Circulated heat for even cooking on multiple racks.
  3. Fan Grill: Grill with fan for crispy results without turning food.
  4. Grill: Top element for browning and grilling.
  5. Defrost: Gentle fan without heat to thaw frozen foods.
  6. Pizza Mode: Intense bottom heat with fan for crispy pizza bases.
  7. Bottom Heat: Lower element only for pastry bases.
  8. Top & Bottom Heat: Both elements for roasting and casseroles.

Tip: Preheat oven for 10-15 minutes before cooking for best results.

Pyrolytic Self-Cleaning

High-temperature cleaning cycle that reduces grease and food residues to ash.

  1. Preparation: Remove all racks and accessories. Wipe excess spills.
  2. Activation: Press SELF-CLEAN button, then START. Door will lock automatically.
  3. Cycle: 2-hour cleaning at approximately 500°C. Display shows remaining time.
  4. Cooling: 1-2 hour cooling period before door unlocks.
  5. Cleanup: Wipe away ash residue with damp cloth once oven is cool.

WARNING! Do not open door during cleaning cycle. Keep children and pets away. Ensure kitchen is well ventilated.

Safety Features

Child Safety Lock: Disables control panel when activated. Door Lock: Automatic during pyrolytic cleaning. Overheat Protection: Thermal cut-out prevents excessive temperatures. Cool Door System: Triple-glazed glass keeps exterior safe to touch. Residual Heat Indicator: Shows when surfaces are hot after use.

Care & Cleaning

Regular cleaning maintains performance and appearance.

Daily: Wipe exterior with damp cloth. Clean spills inside when oven is cool.

Weekly: Remove and wash racks in warm soapy water. Clean door glass with glass cleaner.

Monthly: Run pyrolytic self-cleaning cycle or use oven cleaner on non-self-clean areas.

CAUTION! Never use abrasive cleaners, steel wool, or harsh chemicals. Unplug or disconnect power before cleaning.

Regulatory Information

Complies with AS/NZS 60335.1 and AS/NZS 60335.2.6 for household electrical appliances. Energy rating certified under Australian standards. Copyright © Westinghouse. For support, visit www.westinghouse.com.au or contact customer service 1300 363 711. This appliance is designed for domestic use only.

Troubleshooting

SymptomPossible CauseCorrective Action
Oven not heatingPower supply/function selectionCheck circuit breaker; ensure proper function selected; verify temperature setting.
Uneven cookingRack position/functionUse correct rack position; select Fan Bake for even cooking; preheat adequately.
Door won't openSelf-clean cycle activeWait for cycle to complete and cool; do not force door.
Controls not respondingChild lock activatedDeactivate child lock (press and hold CONTROL LOCK).
Error code on displayFault detectionNote error code; disconnect power for 5 minutes; reconnect. If persists, contact service.
Fan noise during operationNormal convection operationFan noise is normal during convection functions.
Light not workingBulb failureReplace LED bulb (type: E14, 25W max). Disconnect power first.

Reset: Disconnect from power for 5 minutes to reset electronic controls.

Service: 1300 363 711; www.westinghouse.com.au

Westinghouse PXR698 Oven User Manual © - All Rights Reserved 2025