Westinghouse PXR688 Oven User Manual

The Westinghouse PXR688 is a premium built-in electric oven featuring convection cooking, pyrolytic self-cleaning, digital touch controls, multiple cooking functions, a large capacity cavity, and energy-efficient operation. Designed for modern kitchens, it offers precise temperature control, safety features, and easy maintenance. Below are key sections for safety, features, installation, operation, cleaning, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Cooking Functions 7. Using the Self-Cleaning Function 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital touch control panel, convection fan, pyrolytic cleaning system, oven light, telescopic racks, door with triple glazing.

Feature	Description
Convection Cooking	Fan-assisted for even heat distribution and faster cooking
Pyrolytic Self-Cleaning	High-temperature cycle to burn off grease and residue
Digital Touch Controls	Intuitive interface with programmable settings
Multiple Cooking Functions	Bake, grill, fan bake, fan grill, defrost, pizza mode
Large Capacity	68-liter cavity suitable for family meals
Energy Efficiency	A-rated for reduced power consumption
Safety Door Lock	Auto-locks during pyrolytic cleaning
Cool-Touch Door	Triple glazing keeps exterior safe to touch
Programmable Timer	Up to 24 hours with automatic shut-off
Child Lock	Prevents accidental operation

Installation

Unpack and inspect contents. Ensure proper electrical connection and ventilation.

Position oven: Install into standard 600mm wide cabinet cutout.
Electrical connection: Must be performed by qualified electrician. Connect to 230-240V AC, 50Hz supply.
Ventilation: Ensure adequate space around oven as per manual specifications.
Secure oven: Use provided screws to fix into cabinet.
Initial check: Remove all packaging materials from interior.

WARNING! Installation must comply with local electrical and building codes. Disconnect power before installation.

First-Time Setup

After installation, perform initial setup before first use.

Power on: Connect to mains and switch on circuit breaker.
Initial heating: Run oven empty at 200°C for 60 minutes to burn off manufacturing residues (ensure ventilation).
Set clock: Press and hold CLOCK button, use +/- to set time.
Select language: In settings menu, choose preferred language.
Test functions: Briefly test each cooking mode to ensure operation.

CAUTION! During initial heating, slight smoke or odor is normal. Keep kitchen well-ventilated.

Specifications

Model: Westinghouse PXR688
Type: Built-in Electric Oven
Capacity: 68 liters
Power Supply: 230-240V AC, 50Hz
Power Consumption: 2.8-3.2 kW
Cooking Functions: 7 modes including convection, grill, pyrolytic clean
Temperature Range: 30°C to 250°C (grill: 50°C to 250°C)
Control: Digital touch with LED display
Self-Cleaning: Pyrolytic (500°C)
Dimensions (HxWxD): 595 x 595 x 550 mm
Weight: 42 kg

Controls and Settings

Control Panel: POWER, FUNCTION SELECTOR, TEMPERATURE +/- , TIMER, CLOCK, CHILD LOCK, CLEAN START.

Basic Operation: Press POWER, select function with FUNCTION button, set temperature with +/- , set timer if needed. Press START to begin heating.

Settings Menu: Access by holding SETTINGS button for 3 seconds. Options: Clock setting, sound on/off, temperature unit (°C/°F), language, factory reset.

Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate. Display shows padlock icon when active.

Cooking Functions

Select function via FUNCTION button:

Conventional Bake: Top and bottom heating elements. Ideal for cakes, pastries.
Fan Bake: Fan circulates heat. Reduces cooking time, good for multiple racks.
Grill: Top element only. For browning, melting, toasting.
Fan Grill: Grill with fan. Even browning for larger items.
Pizza Function: Intense bottom heat with fan. Crispy pizza bases.
Defrost: Fan only with low heat. Gentle thawing.
Slow Cook: Low temperature (30-100°C) for stews, casseroles.

Tip: Preheat oven for 10-15 minutes for best results. Use oven light to check progress without opening door.

Using the Self-Cleaning Function

Pyrolytic cleaning burns residue at high temperature.

Remove all racks, trays, and debris from oven interior.
Ensure door is properly closed. Press CLEAN START.
Select duration: 2 hours (normal) or 3 hours (heavy soil).
Press START. Door locks automatically. Display shows countdown.
After cycle, oven cools for approximately 1 hour before door unlocks.
Wipe away ash residue with damp cloth.

WARNING! During cleaning, exterior surfaces become very hot. Keep children and pets away. Do not attempt to open door until unlock symbol disappears.

Safety Features

Auto Door Lock: Engages during pyrolytic clean. Cool-Touch Door: Triple glass minimizes heat transfer. Overheat Protection: Cuts power if temperature exceeds safe limit. Child Lock: Disables controls. Residual Heat Indicator: H symbol shows when surfaces are hot after use.

Care & Cleaning

Daily: Wipe exterior with soft, damp cloth. Mild detergent acceptable. Interior: Use pyrolytic cleaning for major spills. For light cleaning, use warm soapy water after oven cools. Door Glass: Clean with glass cleaner, avoid abrasive pads. Control Panel: Use dry cloth only.

CAUTION! Never use steam cleaners, abrasive cleaners, or scouring pads. Disconnect power before cleaning.

Regulatory Information

Complies with AS/NZS 60335.1, AS/NZS 60335.2.6. Energy Rating: 4 stars. This appliance meets applicable electrical safety standards. Copyright © Westinghouse. For support, visit www.westinghouse.com.au or contact 1300 363 344.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Oven not heating	Power supply, settings	Check circuit breaker; ensure oven is properly set to cook function and temperature.
Display blank	Power loss, child lock	Check power connection; press and hold POWER for 5 seconds to reset.
Uneven cooking	Rack position, function	Use recommended rack positions; ensure fan is operating in convection modes.
Self-clean not starting	Door not closed, overloaded	Ensure door is fully closed; remove large debris before cleaning cycle.
Error code E1/E2	Temperature sensor fault	Disconnect power for 10 minutes, reconnect. If persists, contact service.
Door won't open after clean	Cooling cycle incomplete	Wait until temperature drops below 80°C; door unlocks automatically.

Reset: Disconnect from power for 10 minutes to reset electronic controls.

Service: 1300 363 344; www.westinghouse.com.au