Westinghouse Instructions Manual WVE6565SD

The Westinghouse WVE6565SD is a 6.5 cubic foot top-loading washing machine with multiple wash cycles, water level selections, and energy-efficient operation. It features a durable stainless steel tub, automatic unbalance detection, delay start function, and child lock safety feature. Designed for residential use with 120V AC power. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating Wash Cycles 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stainless steel wash tub, Control Panel, Water inlet valves, Drain hose, Adjustable leveling feet, Lid with safety lock.

Feature	Description
Wash Cycles	Normal, Heavy, Delicate, Quick Wash, Bulky Items
Water Level Selection	5 levels (Low to Extra High)
Delay Start	Program start time up to 24 hours
Child Lock	Prevents accidental changes during operation
Automatic Unbalance Detection	Pauses and redistributes load if unbalanced
LED Display	Shows cycle time, settings, and status
Lid Lock	Safety feature during spin cycle
Energy Saver Option	Reduces power consumption
Rinse Hold	Holds water after final rinse
POWER	Turns washer on/off

Installation

Unpack and inspect contents. Place on level floor.

Remove shipping bolts: Use wrench to remove 4 bolts from rear panel.
Connect water supply: Attach hot and cold hoses to corresponding faucets.
Connect drain hose: Place in standpipe or laundry sink.
Level the washer: Adjust front feet until machine is stable.
Plug into grounded 120V AC outlet.

WARNING! Do not remove shipping bolts before moving to final location. Ensure water connections are tight to prevent leaks.

First-Time Setup

Power on washer; run initial test cycle.

Select language: Press and hold POWER + CYCLE for 3 seconds to set display language.
Run clean cycle: Add 1 cup of bleach, select Clean Washer cycle.
Set default preferences: Use OPTIONS button to set default water temperature.
Test operation: Run a quick wash cycle with no load to ensure proper function.

CAUTION! Ensure washer is level before first use to prevent excessive vibration.

Specifications

Capacity: 6.5 cubic feet.
Dimensions: 27" W x 27" D x 42" H.
Voltage: 120V AC, 60Hz.
Water Connections: Hot and cold water inlet.
Max Spin Speed: 700 RPM.
Wash Cycles: 8 programmed cycles.
Control: Electronic with LED display.
Warranty: 1 year parts and labor.
Weight: 150 lbs.

Controls and Settings

Control Panel: POWER, CYCLE SELECTION, WATER LEVEL, TEMPERATURE, OPTIONS, START/PAUSE.

Cycle Selection: Normal, Heavy, Delicate, Quick Wash (20 min), Bulky, Bedding, Clean Washer, Rinse & Spin.

Water Level: Low, Medium Low, Medium, High, Extra High. Temperature: Cold, Warm, Hot. Options: Delay Start (1-24 hrs), Extra Rinse, Pre-Soak, Energy Saver. Safety: Child Lock (hold OPTIONS + START for 3 seconds), Lid Lock during spin.

Connecting Water Supply

Hot and cold water connections required for full functionality.

Turn off water supply before connecting hoses.
Connect blue hose to cold water faucet, red hose to hot water faucet.
Use thread seal tape on connections to prevent leaks.
Open water valves slowly and check for leaks.
Ensure drain hose is secured in standpipe (not more than 96" high).

Tip: Run water through hoses before connecting to flush out debris.

Operating Wash Cycles

Supports various fabric types and soil levels.

Load laundry: Do not exceed recommended capacity.
Add detergent: Use HE detergent only; follow manufacturer instructions.
Select cycle: Choose appropriate cycle for load type.
Set options: Adjust water level, temperature, and additional options.
Start cycle: Press START/PAUSE; lid will lock during operation.
Pause/stop: Press START/PAUSE to pause; press and hold to cancel.
After cycle: Remove clothes promptly to prevent wrinkles.
Clean lint filter: After each cycle, remove and clean filter.

WARNING! Do not overload washer. Balance load for proper operation.

Safety Features

Child Lock: Prevents changes to settings during operation. Lid Lock: Automatically engages during spin cycle. Automatic Unbalance Detection: Stops and redistributes load if unbalanced. Overflow Protection: Shuts off water if detected.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Monthly maintenance: Run Clean Washer cycle with bleach or washer cleaner. Clean lint filter after each use. Check drain hose for obstructions.

CAUTION! Do not use abrasive cleaners. Keep control panel dry.

Regulatory Information

UL Listed: Complies with UL 2157 standards. Energy Star: Meets ENERGY STAR® requirements for energy efficiency. Copyright © 2023 Westinghouse; trademarks of Westinghouse Electric Corporation. For support, visit www.westinghouse.com or contact 1-800-947-3746.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/lid	Check power cord; ensure lid is closed properly.
No water filling	Water supply/hoses	Check water valves are open; inspect hoses for kinks.
Excessive vibration	Leveling/load	Adjust leveling feet; redistribute unbalanced load.
Water not draining	Drain hose/clog	Check drain hose position; clear any obstructions.
Error codes displayed	Various faults	Refer to error code chart in manual; reset power.

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-947-3746; www.westinghouse.com